Publications - coletti | hexxcell

Publications

Edited Books

  1. Coletti, F. (2014). Heat Exchanger Design Handbook. Begell House, New York. [External link]

  2. Coletti, F. and Hewitt, G.F. (2014). Crude Oil Fouling, Deposit Characterization, Measurements, and Modeling. Gulf Professional Publishing (Elsevier). ISBN: 9780128012567. [External link]

CONTACT US
t:+44 (0) 20 8051 2440

e: info@hexxcell.com

Send a message

Featured Posts

Book chapters

  1. Coletti, F., Joshi, H. M., Macchietto, S.,  Hewitt,G. F. (2014). Introduction. In: Coletti, F. and Hewitt, G.F. (Eds), Crude Oil Fouling, Deposit Characterization, Measurements, and Modeling. Gulf Professional Publishing (Elsevier). ISBN: 9780128012567.

  2. Coletti, F., Crittenden, B.D. , Macchietto, S. (2014). Basic science of the fouling process. In: Coletti, F. and Hewitt, G.F. (Eds), Crude Oil Fouling, Deposit Characterization, Measurements, and Modeling. Gulf Professional Publishing (Elsevier). ISBN: 9780128012567.

  3. Coletti, F., Crittenden, B.D. , Hewitt, G.F., Macchietto, S. (2014). Review of Heat Exchanger Design Methodologies and Mathematical Models of Fouling. In: Coletti, F. and Hewitt, G.F. (Eds), Crude Oil Fouling, Deposit Characterization, Measurements, and Modeling. Gulf Professional Publishing (Elsevier). ISBN: 9780128012567.

  4. Coletti, F. and Macchietto, S. (2014). Industrial Scale High-Fidelity Modeling. In: Coletti, F. and Hewitt, G.F. (Eds), Crude Oil Fouling, Deposit Characterization, Measurements, and Modeling. Gulf Professional Publishing (Elsevier). ISBN: 9780128012567.

Journal articles

  1. Diaz-Bejarano E., F. Coletti, S. Macchietto (2016). Impact of complex layering structures of organic and inorganic foulants on the thermo-hydraulic performance of a single heat exchanger tube – a simulation study. Ind. Eng. Chem. Res. 55 (40), pp 10718–10734. [External link]

  2.  Diaz-Bejarano E., F. Coletti, S. Macchietto (2016). Thermo-hydraulic analysis of refinery heat exchangers undergoing fouling. AIChE J. 63(3):984–1001. [External link]

  3. Diaz-Bejarano E., F. Coletti, S. Macchietto (2016). Crude oil Fouling Deposition, Suppression, Removal and Consolidation – and how to tell the difference. Heat Transfer Eng. 38(7-8):681-693 [External link]

  4. Diaz-Bejarano E, Coletti F, Macchietto S, (2016). A New Dynamic Model of Crude Oil Fouling Deposits and Its Application to the Simulation of Fouling-Cleaning Cycles, AIChE J., 62(1):90-107. [External link].

  5. Coletti, F. and S. Macchietto (2011). A dynamic, distributed model of shell–and–tube heat exchangers undergoing crude oil fouling. Ind. Eng. Chem. Res. 50 (8): 4515–4533. [External link].

  6. Coletti, F. and S. Macchietto and Polley G.T. (2011). Effects of fouling on performance of retrofitted heat exchanger networks; a thermo–hydraulic based analysis. Comp. Chem. Eng. 35(5): 907-917. [External link].

  7. Coletti, F. and S. Macchietto (2010). Refinery pre–heat train network simulation: assessment of energy efficiency and carbon emissions. Heat Transfer Eng. 32 (3-4): 228-236. [External link].

  8. Macchietto, S., G.F. Hewitt, F. Coletti, B.D. Crittenden, D.R. Dugwell, A. Galindo, G. Jackson, R. Kandiyoti, S.G. Kazarian, P.F. Luckham, O.K. Matar, M. Millan–Agorio, E.A. Müller, W. Paterson, S.J. Pugh, S.M. Richardson, D.I. Wilson (2010). Fouling in Crude Oil Preheat Trains: a Systematic Solution to an Old Problem. Heat Transfer Eng. 32 (3-4): 197-215. [External link].

  9. Coletti, F., E.M. Ishiyama, W.R. Paterson, D.I. Wilson and S. Macchietto (2010). Impact of deposit ageing and surface roughness on thermal fouling: distributed model. AIChE J. 56(12): 3257-3273. [External link].

  10. Ishiyama, E.M., F. Coletti, S. Macchietto, W.R. Paterson and D.I. Wilson (2010). Impact of deposit ageing on thermal fouling: lumped parameter model. AIChE J. 56(2): 531-545. [External link].

  11. Coletti, F., S. Macchietto and N. Elvassore (2006). Mathematical Modelling of Three–dimensional Cell Cultures in Perfusion Bioreactors. Ind. Eng. Chem. Res. 45(24): 8158-8169. [External link].

In Memoriam Professor Geoffrey F. Hewitt

January 23, 2019

1/3
Please reload

Recent News
Please reload

Archive
Please reload

Refereed Conference Publications in Edited Proceedings

  1. Seegulam, N., F. Coletti and S. Macchietto (2017) Effect of Fouling on Control and Energy Recovery in an Industrial CDU Column Antonio. In: Espuña, Moisès Graells and Luis Puigjaner (Eds), Proceedings of the 27th European Symposium on Computer Aided Process Engineering – (ESCAPE 27), Oct. 1-5, Barcelona, Spain.

  2. Diaz-Bejarano, E. M. Yugo Santos, M. García Dopico, L. Lanchas Fuentes and F. Coletti (2017). The Impact of Fouling on the Optimal Design of a Heat Exchanger Network: An Industrial Case Study.  Int. Conf. Heat Exchangers Fouling and Cleaning, 11-16 Jun., Madrid, Spain (in collaboration with Respol).

  3. Diaz-Bejarano, E, F. Coletti and S. Macchietto (2017). Complex crude oil fouling layers: model predictions Vs. experimental compositional analysis of refinery deposits. Int. Conf. Heat Exchangers Fouling and Cleaning, 11-16 Jun., Madrid, Spain.

  4. Lanchas-Fuentes L., E. Diaz-Bejarano, S. Macchietto, F. Coletti (2016). Management of Cleaning Types and Schedules in Refinery Heat Exchangers. 12th Int. Conf. Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT16). 11-13 Jul., Malaga, Spain (Best Paper award in the Thermal Management and Control session).

  5. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2016). Model-based monitoring of thermal-hydraulic performance of refinery heat exchangers undergoing fouling. 26th European Symposium on Computer Aided Process Engineering. 12-15 Jun., Portorož Slovenia.

  6. Lanchas-Fuentes, L., E. Díaz-Bejarano, S. Macchietto and F. Coletti (2016). Condition-based chemical cleaning of crude oil fouling deposits – a conceptual model. 26th European Symposium on Computer Aided Process Engineering. 12-15 Jun., Portorož Slovenia.

  7. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2015) Impact of crude oil fouling composition on the thermo-hydraulic performance of refinery pre-heat trains. 11th Int. Conf. Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT15). 20-23 Jul., Kruger National Park, South Africa.

  8. Coletti, F., E. Diaz-Bejarano, J. Martinez, S. Macchietto (2015). Heat exchanger design with high shear stress: reducing fouling or throughput? In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson, (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning. 07-12 Jun., Enfield, Ireland.

  9. Diaz-Bejarano, E. and F. Coletti (2015). Modelling Shell-Side Crude Oil Fouling in Shell-and-Tube Heat Exchangers. In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson, (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning. 07-12 Jun., Enfield, Ireland.

  10. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2015). Crude Oil Fouling Deposition, Suppression, Removal and How to Tell the Difference. In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson, (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning. 07-12 Jun., Enfield, Ireland.

  11. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2015). Beyond Fouling Factors: a Reaction Engineering Approach to Crude Oil Fouling Modelling. In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson, (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning. 07-12 Jun., Enfield, Ireland.

  12. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2015). Detection of changes in fouling behaviour by simultaneous monitoring of thermal and hydraulic performance of refinery heat exchangers. Krist V. Gernaey, Jakob K. Huusom and Rafiqul Gani (Eds.), 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering. 31 May – 4 June, Copenhagen, Denmark.

  13. Diaz-Bejarano, E., G. Pelloja, F. Coletti and S. Macchietto (2015). Optimal Heat Exchanger Bypass Control to Mitigate the Cost of Fouling in Refinery Preheat Trains. In: S. Pierucci, J. J. Klemeš (Eds.), Int. Conf. on Chemical & Process Engineering (ICheaP12). 9-22 May, Milan, Italy.

  14. Tajudin, Z., J. Martinez, E. Diaz-Bejarano, I. Valkov, P. Orzlowski, F. Coletti, S. Macchietto and G.F. Hewitt (2015). Experimental analysis and baseline hydraulic characterization of HiPOR, a high pressure crude oil fouling rig. In: S. Pierucci, J. J. Klemeš (Eds.), Int. Conf. on Chemical & Process Engineering (ICheaP12). 9-12 May, Milan, Italy.

  15. Coletti, F. and S. Macchietto (2010). Validation of a Novel Model for Shell–and–Tube Heat Exchangers Undergoing Crude Oil Fouling. In: Proc. 14th Int. Heat Transfer Conf. (IHTC14). 10-15 Aug., Washington, DC (USA), ASME. Paper IHTC14-23158, pp: 741-750.

  16. Coletti, F. and S. Macchietto and Polley G.T. (2010). Effects of fouling on performance of retrofitted heat exchanger networks; a thermo–hydraulic based analysis. In: S. Pierucci and G. Buzzi Ferraris (Eds.), Eur. Sym. Computer Aided Process Engineering (ESCAPE) 20; Ischia, Naples, Italy. Jun. 6-9. Elsevier, pp: 19-24. (Selected to appear on special issue of Comp. Chem. Eng.).

  17. Macchietto, S., G.F. Hewitt, F. Coletti, B.D. Crittenden, D.R. Dugwell, A. Galindo, G. Jackson, R. Kandiyoti, S.G. Kazarian, P.F. Luckham, O.K. Matar, M. Millan–Agorio, E.A. Müller, W. Paterson, S.J. Pugh, S.M. Richardson and D.I. Wilson (2009). Fouling in Crude Oil Preheat Trains: a Systematic Solution to an Old Problem. In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson, (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning; Schladming, Austria, Jun. 14-19, pp: 1-14. (Selected to appear on special issue of Heat Transfer Eng.).

  18. Coletti, F. and S. Macchietto (2009). Refinery pre–heat train network simulation: assessment of energy efficiency and carbon emissions. In: H. Müller–Steinhagen, M.R. Malayeri and P. Watkinson (Eds.), Int. Conf. Heat Exchangers Fouling and Cleaning; Schladming, Austria, Jun. 14-19, pp: 61-68. (Selected to appear on special issue of Heat Transfer Eng.).

  19. Coletti, F. and S. Macchietto (2009). Predicting Refinery Energy Losses Due to Fouling in Heat Exchangers. In: R.M. de Brito Alves, C.A. Oller do Nascimento and E Chalbaud Biscaia Jr. (Eds.), Int. Sym. Process Systems Engineering (PSE) ’09; Salvador de Bahia, Brazil, Aug. 16-20. Elsevier, pp: 219-224.

  20. Coletti, F. and Macchietto, S. (2009). A heat exchanger model to increase energy efficiency in refinery pre–heat trains. In: R. Gani and A. Kraslawski (Eds.), Eur. Sym. Computer Aided Process Engineering (ESCAPE) 19; Cracow, Poland, Jun. 14-17. Elsevier, pp: 1245-1250.

  21. Coletti, F. and S. Macchietto (2008). Minimising efficiency losses in oil refineries: a heat exchanger fouling model. Sustainable Energy UK Oxford, UK, May 13-14.

  22. Coletti, F. and Macchietto, S. (2007). A design Method for Improving Oxygenation in Perfusion Bioreactors Using Scaffold Micro–channels. In: F. Allgower and M. Reuss (Eds.), Proc. 2nd Conf. Foundations of Systems Biology in Engineering (FOSBE). 9-12 Sep., Stuttgart, Germany. IFAC, pp: 337-342.

  23. Coletti, F. and Macchietto, S. (2007). Simple 3D Vascularisation Models for Perfusion Bioreactors. In: M. Perrier and J. Moreno (Eds.); Proc. Computer Applications in Biotechnology (CAB) + Int. Sym. Dynamics and Control of Process Systems (DYCOPS); 4-6 Jun, Cancun, Mexico. IFAC, pp: 171-176.

  24. Coletti, F., S. Macchietto and N. Elvassore (2006). Mathematical Modelling of Three–dimensional Cell Cultures in Perfusion Bioreactors – Part II. In: W. Marquardt and C. Pantelides (Eds.), Proc. 16th Eur. Sym. Computer Aided Process Engineering (ESCAPE) and 9th Int. Sym. Process Systems Engineering (PSE). 9-13 Jul, Garmisch–Partenkirchen, Germany. Elsevier, pp: 1699-1704.

 Conference Abstracts

  1. Diaz-Bejarano, E., Yugo Santos, M., Garcia Dopico, M. and Coletti, F. (2017). Evaluation of heat exchanger network retrofit design using plant data. UK Heat Transfer Conference, 4-5 Sep., Brunel University London. 

  2. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2017). A numerical investigation of thermal-conductivity mixing models for crude oil fouling deposits. UK Heat Transfer Conference, 4-5 Sep., Brunel University London.

  3. Diaz-Bejarano, E. and F. Coletti (2017). Effects of fouling build-up on shell-side clearances and its impact on thermo-hydraulic performance of refinery heat exchangers. UK Heat Transfer Conference, 4-5 Sep., Brunel University London.

  4. Coletti (2017). On the combined use of dynamic simulations and plant data to account for fouling in heat exchanger design. 2nd Thermal &Fluids Engineering Conf., 3-5 Apr., Las Vegas, NA (USA).

  5. Coletti, F., E. Diaz-Bejarano and S. Macchietto (2017). Retrofitting Heat Exchangers with High Shear Stress Design: Evaluating the Impact on Performance of Crude Pre-Heat Trains. AIChE Spring Meeting. 26-30 Mar. San Antonio, TX (USA). Abstract #480163.

  6. Coletti, F., E. Diaz-Bejarano, S. Macchietto, L. Lanchas (2017). Evaluation, Prediction, Management and Mitigation of Fouling in Heat Exchanger Networks for Improved Energy Efficiency. AIChE Spring Meeting. 26-30 Mar. San Antonio, TX (USA). Abstract #480200.

  7. Diaz-Bejarano, E., F. Coletti and S. Macchietto (2017). Monitoring and analysis of inorganics breakthrough in refinery pre-heat trains. AIChE Spring Meeting. 26-30 Mar. San Antonio, TX (USA). Abstract #480226.
    Diaz-Bejarano, E., F. Coletti and S. Macchietto (2017). A novel way of monitoring heat exchanger performance:  the dynamic TH-λ plot. AIChE Spring Meeting. 26-30 Mar. San Antonio, TX (USA). Abstract #480245.

  8. Trukhan, S. N., R. I. Rueda-Velásquez, V. Subramani, O. N. Martyanov and F. Coletti (2016). The Stratification of Crude Oil Residues at Elevated Temperatures Detected Via in-Situ ESR. AIChE Spring Meeting. 10-14 Apr., Houston, TX (USA). Paper ID# 443138.

  9. Lanchas-Fuentes, L., E. Díaz-Bejarano, Francia, V., S. Macchietto and F. Coletti (2016). Cleaning heat exchangers: how, when, where and how much? AIChE Spring Meeting. 10-14 Apr. Houston, TX (USA).

  10. Yang, J., F. Coletti, E.A. Müller, S. Macchietto, and O.K. Matar (2015). Numerical simulation of fouling in crude-oil heat exchangers: The interaction between different fouling routes. AIChE Annual Meeting. 8-13 Nov., Salt Lake City, UT (USA).

  11. Diaz-Bejarano, E., L. Lanchas, F. Coletti and S. Macchietto (2015). Condition-Based Cleaning of Refinery Heat Exchangers Undergoing Crude Oil Fouling. AIChE Annual Meeting. 8-13 Nov., Salt Lake City, UT (USA). Paper ID# 435549.

  12. Tajudin, Z., E. Diaz-Bejarano, F. Coletti, S. Macchietto and G. F. Hewitt (2015). Effect of friction factor correlations and error propagation on differential pressure in a crude oil fouling measuring rig. AIChE Annual Meeting. 8-13 Nov., Salt Lake City, UT (USA). Paper ID# 435539.

  13. Crastes, M., L. Lagkaditi, J. Ball, J. Yang, F. Coletti, S. Macchietto, O. K. Matar Numerical study of crude oil fouling in a Taylor-Couette-type reactor. American Physical Society, Division of Fluid Dynamics, Annual Meeting. 22-24 Nov., Boston, MA (USA).

  14. Coletti. F and S. Macchietto (2014). An Integrated Software Framework for the Simulation, Monitoring, Design and Retrofit of Heat Exchanger Networks Subject to Fouling. AIChE Annual Meeting. 16-21 Nov., Atlanta, GA (USA).

  15. Coletti. F and Macchietto, S. (2010). Retrofit of Refinery Heat Exchangers to Mitigate Fouling Based On An Advanced Thermo-Hydraulic Model. AIChE Annual Meeting, Salt Lake City, UT (USA). Nov. 7-12.

  16. Coletti. F, G.F. Hewitt, D.R. Dugwell and Macchietto, S. (2010).  Integrating Crude Oil Fouling Modelling and Experiments On a New High Pressure Pilot-Scale Test Rig.  AIChE Annual Meeting, Salt Lake City, UT (USA). Nov. 7-12.

  17. Diaz-Bejarano, E., Coletti. F and Macchietto, S. (2014). Detailed thermo-hydraulic modelling of crude oil heat exchangers abnormal fouling behaviour due to inorganic deposits. AIChE Annual Meeting. 16-21 Nov., Atlanta, GA (USA).

  18. Tajudin, Z.B., S. Macchietto, F. Coletti, G.F. Hewitt (2014). Mathematical Simulation and Model Validation of HiPOR, a High Pressure Crude Oil Fouling Measuring Rig. AIChE Annual Meeting. 16-21 Nov., Atlanta, GA (USA).

  19. Coletti, F. and Macchietto, S. (2010). Refinery preheat train modelling, simulation and energy optimisation –the next generation. Process Systems Enterprise (PSE) Annual Meeting, London, UK, Sep 15-17.

  20. Polley, G.T., D.I. Wilson, S. Macchietto, F. Coletti and J.D. Kumana (2010). Review of Developments in the Use of Fouling Models in Pre–Heat Train Design and Operational Analysis. AIChE Spring Meeting, San Antonio, TX (USA). Mar. 21-25.

  21. Polley, G.T. ,D.I. Wilson, S. Macchietto, F. Coletti and J.D. Kumana (2010). Holistic Approach to the Revamping and De–Bottlenecking of Pre–Heat Trains. AIChE Spring Meeting, San Antonio, TX (USA). Mar. 21-25.

  22. Coletti. F and Macchietto, S. (2009). Multi–Scale Modelling of Refinery Pre–Heat Trains: Effects of Crude Fouling On Energy Recovery, Carbon Emissions and Economics. AIChE Annual Meeting, Nashville, TN (USA). Abstract No. 364d. Nov. 8-13.

  23. Coletti, F. and Macchietto, S. (2008). Modelling of Fouling in Crude Oil Pre–Heat Trains to Reduce Energy Losses and Carbon Emissions. AIChE Annual Meeting, Philadelphia, PA (USA). Abstract No. 592b. Nov. 16-21.

  24. Coletti, F. and Macchietto, S. (2007). Modelling of fouling in crude oil pre–heat trains to reduce furnace duty and emissions. Institute of Physics, Early–Career Researchers’ Meeting, Loughborough, UK. Sep. 4th.

  25. Coletti, F. and Macchietto, S. (2006). Cell Cultures in Perfusion Bioreactors: Analysis and Selection of Scaffold Channelling Structure Based on Reynolds and Peclet Numbers. AIChE Annual Meeting. 10-17 Nov., San Francisco, CA (USA). Paper ID# 74133. 

Invited article in specialised magazine

  1. Macchietto S. and Coletti F. (2015). Innovation: better together. The Chemical Engineer 893: 24-27. (Cover article).

  2. Coletti, F. and S. Macchietto (2011). Refinery Energy Losses Due to Fouling in Heat Exchangers. Hydrocarbon World 6(1).

Patents

  1. Coletti, F. Diaz-Bejarano, E., Macchietto, S., Kulikov, A., Porsin, A. (2014). Heating device for high temperature fouling rig. PCT/RU2014/000380 of 26.05.2014. 

  2. Nizovskiy, A., Kulikov, A., Rogozhnikov, V., Porsin, A., Diaz-Bejarano, E., Macchietto, S., Coletti, F. (2014). Method for flameless starting up a catalytic device. PCT/RU2014/000377 of 26.05.2014. 

© Hexxcell Ltd.  Registered in England and Wales. No. 07722826 | Registered Office: Hammersmith Foundry, 77 Fulham Palace Road, London, UK, W6 8JA | VAT Reg. No.: GB 165 4681 86